TYME Elite 2 User Guide
Watch function introduction
Alarm clock
After the watch and APP are connected, you can set a single alarm clock and a circular alarm clock on the APP side, and you can set up to 8 alarm clocks.
Secondary watch
Click the start of the start button to start, click the pause button to timely stop, and click the reset button to take the timeto zero. A maximum of 99 data can be saved.
Heart rate
When entering the heart rate measurement interface, the bottom of the bottom green light starts to measure. When the measurement is completed in about 40 seconds, there will be a vibration reminder. If it is prompted, "Please wear it again and try again", you need to wear a watch.
Blood oxygen
When entering the blood oxygen measurement interface, the bottomred light starts to test for 30 ~ 60 seconds to complete the measurement.
Blood Pressure
When entering the blood pressure measurement interface, the bottom green light starts to test for 30 ~ 60 seconds to completethe measurement.
Exercise
Sport mode options: walking, running, riding, skipping rope, badminton,football, basketball, etc., click the icon to start exercise.
Information
After the watch and APP are connected, open the relevant information push on the APP side. The watch can receive the corresponding message push on the side of the watch, which can be saved up to 8 messages.
Weather
After the watch is connected to the APP, the weather interface will display the real-time weather temperature and the type of weather in the next 7 days.
Sleep
Watches show the total sleep last night and the length of light sleepand deep sleep.
Set up
The setting function contains display (brightness adjustment, screen time,dial switching, screen clock, main menu view view,rolling wrist bright screen), vibration & ringing, not disturbing mode, power saving mode,call,system,about.
Control center
Function introduction: screen brightness adjustment, do not disturb mode, power saving mode, settings, flashlight, QR code.
Common problem
1. The watch cannot be turned on Press the power key for more than 6 seconds. The battery power may be too low. Please charge it in time.
2. Blue tooth is not connected or cannot be connected
1) Please try to restart the watch and re-link.
2) Please try to restart the Blue tooth of the mobile phone and connect again.
3) Do not connect other Blue tooth devices at the same time.
3 Watch measuring heart rate blood pressure, blood oxygen data abnormal cause
1) Generally, the sensor of the watch is caused by poor contact with the human body.
2) Please pay attention to the full contact with the wrist during measurement.
4. Sleep data abnormal cause
1) Sleep monitoring is the state of self -conscious sleep and getting up, and needs to be worn correctly.
2) When you fall asleep too late or wear it, you may have errors.
3) Do not monitor sleep data during the day. The default sleep monitoring is from 9:30 pm to 12:00 noon the next day.
For more common questions, please see the app
[My> FAQ]
Bluetooth data transmission
When connecting with mobile phones, the watch will timely synchronize some data with mobile phones in time,including weather, notification message, and
sports health data. After the connection is disconnected or closed, these data will not be synchronized.
Notice:
1) Do not charge in a humid and water environment
2) Please regularly clean the magnetic charging hole on the back of the watch on the back of the watch to ensure that the watch's magnetic suction charging hole is fitted with the magnetic suction charger to ensure normal charging.
3) This product is not equipped with a power adapter. To ensure the safety of family and property, when charging, you can use a computer USB interface or choose a power adapter with an output of no more than 5V1A. Please purchase a power adapter through regular channels to prevent the use of low-quality
and fake Power adapter to avoid causing burst or fire.
When connecting with mobile phones, the watch will timely synchronize some data with mobile phones in time,including weather, notification message, and
sports health data. After the connection is disconnected or closed, these data will not be synchronized.
Notice:
1) Do not charge in a humid and water environment
2) Please regularly clean the magnetic charging hole on the back of the watch on the back of the watch to ensure that the watch's magnetic suction charging hole is fitted with the magnetic suction charger to ensure normal charging.
3) This product is not equipped with a power adapter. To ensure the safety of family and property, when charging, you can use a computer USB interface or choose a power adapter with an output of no more than 5V1A. Please purchase a power adapter through regular channels to prevent the use of low-quality
and fake Power adapter to avoid causing burst or fire.
Precautions
1. The measurement results of this product are for reference only. Do not be used as a medical use and basis for the guidance of the doctor. Cut this measurement result self-diagnosis and treatment.
2. The waterproof level of this product is IP68, which cannot be used for deep diving and soaking in water for a long time. In addition, this product does not heat the water because the water vapor will affect the watch.
3. In the absence of any notification, the company's right to modify the content of this manual will not be notified separately. Some functions are different in the corresponding software version, which is normal.